Been playing more in cad. I wish building the cage was this easy Weighs 185 lbs as seen here. We'll see where this actually goes. I need to start modeling the transmission and engine and model them roughly so that I can nail down more dimensions. The red tubes are 1.625 X 0.083 4130, and the green tubes are 1.25 X 0.065 4130.

I ordered a set of C5 Corvette uprights today. They will be a good starting point for my front suspension. I will be doing 4130 tube wishbones that are longer then stock corvette parts.

The 2JZ will be a structural part of my chassis. up front. I will triangulate the front as much as possible while still retaining the ability to pull the motor and transmission. I received the last part of the rear drive train yesterday. Now I have a complete R230 rear with axles and hubs. I'm hoping I can come up with a good steel upright for the rear so that I can use this R230 with stock axles. if not, I will run the C5 rear uprights with custom axles.